The customer is responsible for unloading merchandise upon delivery.
Features and Specifications
Power Rating - Continuous Standby (Derate 3.5% per 1,000 feet elevation above sea level.)
Power Output (60 Hz) - 120/240 1-phase / 1.0 p.f.
Natural Gas - 10.0 KW; 10.0 KVA; 41 Amps
LP Gas - 12.0 KW; 12.0 KVA; 50 Amps
Engine Data - This model CARB (California Air Resources Board) Approved
Make / Model
Rated Power (Derate 3.5% per 1,000 feet elevation above sea level.)
Full Load LP Gas (One gallon of L.P. gas equals 4.23 lbs.)
2.2 gallons / hour
Half Load LP Gas (One gallon of L.P. gas equals 4.23 lbs.)
1.4 gallons / hour
Full Load Natural Gas
195 feet3 / hour
Half Load Natural Gas
140 feet3 / hour
Required Fuel Pressure
4-6 oz or 7-11" w.c.
Engine Features - Standard Features
Vapor Fuel System
Critical Grade Exhaust Silencer
Battery Rack & Cables (Battery not included. Requires 12 Volt / Group 26 / 500 CCA battery.)
Vapor Fuel Filter
dB(A) Rating @ 7 Meters (23 feet)
68 N-L / 69.5 F-L
Control System - Standard Features
Low Oil Protection
Float Battery Charger
Running Time Meter
Generator Type (Rotating Field Brushless design)
+ / - 5%
Frequency Regulation (NL-FL)
+ / - 3%
Motor Starting Ability (Code G capacitor start motor.)
Mainline Circuit Breaker - Not Supplied
45 amps / NG - 50 amps / LP recommended
Size and Weight
L x W x H (inches)
40.75 x 31.75 x 31
Ship Weight (pounds)
UL Listed ASCO Automatic Transfer Switch (165 Series) 100 amp 120/240 single phase - NEMA 1 enclosure (indoor) (3R optional).
Vapor Fuel Strainer
Designed to filter contaminants in the fuel. The contaminants range in the form of dirt and metal, water and air (vapor). For all PSS models.
Engine Control Module For 2 Wire Start System
Engine Heater with Thermostat
For those living in a cold weather climate, this accessory provides faster engine starts during the cold winter months, by circulating warm oil into the cold engine. For PSS8, PSS12 & PSS15 Models.
This heater sits under the battery and encloses all four sides to ensure quick and easy starting in cold weather climates. For PSS8, PSS12 & PSS15 Models.
Converts a 4-wire start generator to a 2-wire start Generator – For PSS8, PSS12 & PSS15 Models. Winco's PSS8, PSS12 & PSS15 are designed to work with the ASCO 165 4-wire transfer switches. If you are using a pre-existing 2-wire switch you will need to purchase this option.