The customer is responsible for unloading merchandise upon delivery.
Features and Specifications - This generator is UL Listed.
Power Rating - Continuous Standby (Derate 3.5% per 1,000 feet elevation above sea level.)
Power Output (60 Hz) - 120/240 1-phase / 1.0 p.f.
Natural Gas - 12 KW; 12 KVA; 50 Amps
LP Gas - 15 KW; 15 KVA; 62 Amps
Mainline Circuit Breaker - Not available Through Winco
60 amps / NG - 70 amps / LP recommended
Engine Data - This model CARB (California Air Resources Board) Approved
Make / Model
Briggs & Stratton Vanguard
Displacement
895 c.c. OHV
Rated Power (Derate 3.5% per 1,000 feet elevation above sea level.)
31 HP
Engine Speed
3600 rpm
Fuel Consumption
Full Load LP Gas (One gallon of L.P. gas equals 4.23 lbs.)
2.96 gallons / hour
Half Load LP Gas (One gallon of L.P. gas equals 4.23 lbs.)
1.75 gallons / hour
Full Load Natural Gas
260 feet3 / hour
Half Load Natural Gas
170 feet3 / hour
Required Fuel Pressure
4-6 oz or 7-11" w.c.
Engine Features - Standard Features
Electronic Ignition
Vapor Fuel System
Critical Grade Exhaust Silencer
Battery Rack & Cables (Battery not included. Requires 12 Volt / Group 26 / 500 CCA battery.)
Vibration Isolators
Cooling System
Air
dB(A )Rating @ 7 Meters (23 feet)
67 N-L / 72.5 F-L
Control System - Standard Features
Auto-Off-Test-Switch
Low Oil Protection
Float Battery Charger
Running Time Meter
Generator Data
Generator Type (Rotating Field Brushless design)
RFL
Voltage Regulation
+ / - 1%
Frequency Regulation (NL-FL)
+ / - 3%
Motor Starting Ability (Code G capacitor start motor.)
7.5 HP
Recommended Mainline Circuit Breaker - Not Supplied
120/240 Single Phase 60 amps / NG - 70 amps / LP recommended
Size and Weight
L x W x H (inches)
48.25 x 32.75 x 34.25
Ship Weight (pounds)
760
Warranty Information
Engine
2 years
Generator
1 year
Optional Accessories
UL Listed ASCO Automatic Transfer Switch (165 Series) 100 amp 120/240 single phase - NEMA 1 enclosure (indoor) (3R optional).
Vapor Fuel Strainer
Designed to filter contaminants in the fuel. The contaminants range in the form of dirt and metal, water and air (vapor). For all PSS models.
Engine Control Module For 2 Wire Start System
Converts a 4-wire start generator to a 2-wire start Generator – For PSS8, PSS12 & PSS15 Models. Winco's PSS8, PSS12 & PSS15 are designed to work with the ASCO 165 4-wire transfer switches. If you are using a pre-existing 2-wire switch you will need to purchase this option.
Engine Heater with Thermostat
For those living in a cold weather climate, this accessory provides faster engine starts during the cold winter months, by circulating warm oil into the cold engine. For PSS8, PSS12 & PSS15 Models.
Battery Heater
This heater sits under the battery and encloses all four sides to ensure quick and easy starting in cold weather climates. For PSS8, PSS12 & PSS15 Models.
