Winco DP7500 Portable Generator


Our NEW industrial line DYNA Professional is going to be a great addition to any work crew or master craftsman’s garage. The DP7500 will not disappoint, powered by a Honda GX390 engine, clean power, and a full panel GFCI protected panel.

Price Includes Freight to a Business Address – The customer is responsible for unloading merchandise upon delivery.


Printable Brochures:


2 Wheel Dolly Kit

Winco Manual Transfer Switch 30 AMP

Dolly Kit

2-Wheel Dolly Kit

Generator Cover

Canvas Generator Cover

Line Voltage Monitor

Line Voltage Monitor

60/30 Amp Emergency Transfer Service Kit

60/30 Amp Emergency Manual Transfer Service Kit

30 Amp Plug Twist Lock Plug

30 Amp Plug


Battery – 12V BCI Group 20 or 24 300CCA




  • Honda GX390 Engine - You expect the best, you get the best.  The Honda GX390 engine has more power, lower fuel consumption, and lower emissions than previous versions.
  • Low Oil Protection - In the event there is a low oil level, the engine will shut down to protect the engine from damage.
  • Clean Power - This unit has less than 5% Total Harmonic Distortion, meaning that it is safe to run sensitive electronics.
  • Full Panel GFCI: The panel is fully GFCI protected and OHSA compliant.
  • Sturdy Wrap-Around Welded Tubular Cradle - Winco uses 1" tubular steel for dependable durability.
  • 8 Gallon Fuel Tank - The EPA-approval steel fuel tank design eliminates carbon emissions.
  • 100% Load Tested - Every generator is fully tested prior to leaving Winco's facility.


  • Starting Watts: 7,500
  • Continuous Watts: 6,720
  • Continuous Amps: 56/28
  • Output: 120/240 V
  • Voltage Regulation: CAPACITOR +/- 5%
  • Frequency Regulation: +/- 3%
  • Main Circuit Breaker: 30 Amp, 240V (GFCI)
  • Bonded Neutral: Yes
  • 120 Volt Receptacles: (2) NEMA 5-20 20A (GFCI)
  • 120/240 Volt Receptacles: (1) NEMA L14-30 30A (GFCI)
  • Lifting Eye: Yes
  • Generator Warranty: 3 Years Commercial


  • Engine Brand: Honda
  • Engine Model: GX390
  • Engine Starter: Recoil/Electric
  • Engine Speed: 3600 RPM
  • Engine Cylinders: Single
  • Displacement/Type: 389 CC / OHV
  • Low Oil Protection: Standard
  • Oil Capacity: 1.2 Quarts
  • Fuel Tank:  8 Gallon
  • Fuel Gauge:  Yes
  • Full Load Run Time:  7 Hours
  • Hour Meter:  Yes
  • Battery Size: BCI20 or 24HL 300CCA
  • Motor Starting: 2 HP (Code G capacitor start motor)
  • dBA at 7 Meters: 83.7
  • Protective Roll Frame: 14 Gauge Steel
  • EPA Approved: Yes
  • CARB Approved: Yes
  • CSA Approved: Yes
  • UL Listed: No
  • Engine Warranty: 3 Years Commercial


  • Dimensions:  29" L x 21.5" W x 23.6" H
  • Net Weight: 190 Lbs
  • Shipping Dimensions: 30" L x 22" W x 24" H
  • Shipping Weight: 210 Lbs


  • 2 Wheel Dolly Kit - Gives your generator excellent mobility on the ground. The 10" flat free tires get you through mud, snow, sand and soggy lawns. The solid steel axle runs the entire width of the generator providing superior strength. All components are protected from corrosion with our durable baked on powder coat paint system. 32 Lbs.
  • Canvas Generator Cover - Storage can be hard on your generator. Moisture and dirt can damage the engine and generator windings over time. Often during transport and storage the generator is damaged by scrapes and dents. Winco's heavy tailored canvas cover will protect your generator from these hazards protecting your investment. A built in band keeps the cover in place. This cover is for generators with 2-wheel dolly kits installed.  3 Lbs.
  • Line Voltage Monitor - This compact voltmeter can be plugged in to the 120-volt (NEMA 5-20) receptacle on any WINCO generator to assure you that your generator is functioning properly.  1 Lb.
  • 60/30 Amp Emergency Transfer Service Kit - The ET/S System allows your portable generator to be quickly and safely connected to a building electrical panel for backup service during a power outage. A hinged lockable enclosure contains a 12-foot cord with a NEMA L14-30 twist-lock plug and stores the cord set when not in use. A quality Square D circuit breaker load center with interlocked generator and utility main breakers to prevent feedback to the utility, installs next to the building electrical service panel. Four 120-volt (or 8 tandem) or two 240-volt branch circuits or a combination of the two can be connected for emergency service. This manual transfer switch is not UL listed.  45 Lbs.
  • 30 Amp Locking Plug - (NEMA L14-30) The 30 amp twist-lock plug is perfecting for running power into a transfer switch or other distribution box. The cord is sourced locally and specifications should be determined by a competent electrician taking distance, load, and other environmental factors into account.  1 Lb.

Additional information

Weight 272 lbs
Dimensions 33 x 23 x 32 in

You may also like…