Winco W10000VE Portable Generator


The WINCO W10000VE is a 40 amp continuous duty generator perfect for flat top roofing, concrete contractors, and general construction. The Briggs & Stratton Vanguard 18 HP engine is commercial grade and built to last for thousands of hours of use with proper maintenance. The generator and engine produce clean and smooth electrical power that is safe for sensitive electronics yet powerful enough to safely run compressors and other power tools. For flat top roofers this generator is large enough to run one robotic welder and one handheld welder.


Price Includes Freight to a Business Address – The customer is responsible for unloading merchandise upon delivery.


Printable Brochures:


2 Wheel Dolly Kit

Winco Manual Transfer Switch 60 Amp


Dolly Kit

2-Wheel Dolly Kit

Generator Cover

Canvas Generator Cover

Line Voltage Monitor

Line Voltage Monitor

60/60 Amp Emergency Transfer Service Kit

60/60 Amp Emergency Manual Transfer Service Kit

60 Amp Straight Blade Plug

60 Amp Plug

Battery Trickle Charger

Battery Trickle Charger

Maintenance Kit

Maintenance Kit – 16200-007 – Includes: air filter, spark plug, oil, Sta-Bil fuel stabilizer & oil filter.




  • Briggs & Stratton Vanguard Engine - Premium grade Vanguard engines are application engineered to power equipment that works for a living.
  • Low Oil Protection - In the event there is a low oil level, the engine will shut down to protect the engine from damage.
  • Powder Coat Paint: For an incredibly durable finish.
  • Sturdy Wrap-Around Welded Tubular Cradle - Winco uses 13 gauge steel to provide industrial strength support.
  • 7 Gallon Fuel Tank - The EPA-approval steel fuel tank design eliminates hydrocarbon emissions.
  • Premium Square D Circuit Breakers - Providing clear and instant identification of a tripped circuit with a Visi-Trip indicator.
  • 100% Load Tested - Every generator is fully tested prior to leaving Winco's facility.


  • Surge Watts: 10,500
  • Continuous Watts: 9,600
  • Continuous Amps: 80/40
  • Output: 120/240 VAC
  • Voltage Regulation: Capacitor +/- 5%
  • Frequency Regulation: +/- 3%
  • Main Circuit Breaker: 40 Amp, 240 VAC
  • Bonded Neutral: Yes
  • 120 Volt Receptacles: (2) NEMA 5-20 20A (GFCI)
  • 120/240 Volt Receptacles: (1) NEMA L14-60 60A (GFCI)
  • 240 Volt Receptacles:  (1) NEMA L6-30R 30A (GFCI)
  • 2-Wheel Dolly Kit: Optional
  • Protective Roll Frame: 13 Gauge Steel
  • Generator Warranty: 2 Years Commercial


  • Engine Brand: Briggs & Stratton
  • Engine Model: Vanguard
  • Engine Starter: Recoil/Electric
  • Engine Speed: 3600 RPM
  • Engine Cylinders: V-Twin
  • Displacement/Type: 570 CC / OHV
  • Low Oil Protection: Standard
  • Oil Capacity: 1.5 Quarts
  • dBA at 7 Meters: 78
  • Fuel Tank:  7 Gallon
  • Fuel Gauge:  Yes
  • Full Load Run Time:  4.3 Hours
  • Hour Meter:  Yes
  • Motor Starting: 3 HP (Code G capacitor start motor)
  • EPA Approved: Yes
  • CARB Approved: Yes
  • CSA Approved: No
  • UL Listed: No
  • Battery Size: BCI Group U1 300 CCA (Battery Not Included)
  • Lifting Eye: Yes
  • Engine Warranty: 3 Years Commercial


  • Dimensions:  33.7" L x 23" W x 22.1" H
  • Dimensions with Wheel Kit:  38.3" L x 28.8" W x 28.9" H
  • Net Weight: 253 Lbs
  • Shipping Dimensions: 34" L x 24" W x 28" H
  • Shipping Weight: 306 Lbs


  • 2 Wheel Dolly Kit - Gives your generator excellent mobility on the ground. The 10" flat free tires get you through mud, snow, sand and soggy lawns. The solid steel axle runs the entire width of the generator providing superior strength. All components are protected from corrosion with our durable baked on powder coat paint system. 32 Lbs.
  • Canvas Generator Cover - Storage can be hard on your generator. Moisture and dirt can damage the engine and generator windings over time. Often during transport and storage the generator is damaged by scrapes and dents. Winco's heavy tailored canvas cover will protect your generator from these hazards protecting your investment. A built in band keeps the cover in place. This cover is for generators with 2-wheel dolly kits installed.  5 Lbs.
  • Line Voltage Monitor - This compact voltmeter can be plugged in to the 120-volt (NEMA 5-20) receptacle on any WINCO generator to assure you that your generator is functioning properly.  1 Lb.
  • 60/60 Amp Emergency Transfer Service Kit - The ET/S System allows your portable generator to be quickly and safely connected to a building electrical panel for backup service during a power outage. A hinged lockable enclosure contains a 12-foot cord with a NEMA 14-60 plug and stores the cord set when not in use. A quality Square D circuit breaker load center with interlocked generator and utility main breakers to prevent feedback to the utility, installs next to the building electrical service panel. Four 120-volt (or 8 tandem) or two 240-volt branch circuits or a combination of the two can be connected for emergency service. This manual transfer switch is not UL listed. 48 Lbs.
  • 60 Amp Locking Plug - (NEMA L14-60)  The 60 amp straight blade plug is perfect for running power into a transfer switch or other distribution box. The cord is sourced locally and specifications should be determined by a competent electrician taking distance, load, and other environmental factors into account. 1 Lb.
  • Battery - BCI Group U1 300 CCA - 17 Lbs.
  • Battery Trickle Charger - This battery charger is designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. Included is a quick connect ring terminal harness for hard to reach areas and alligator clips for an alternate connection.  2 Lbs.
  • Maintenance Kit - 16200-007 - Your generator requires regular maintenance. Our kits provide all of the necessary products to ensure your generator is ready when you need it most.  (Includes: air filter, spark plug, oil, Sta-Bil fuel stabilizer & oil filter). 6 Lbs.

Additional information

Weight 253 lbs
Dimensions 34 × 24 × 28 in

You may also like…